Skip to Content
Tampa Bay Area Boat Lift Service And Repair Inc.
About us
About us
Contact Us
Maintenance Plans
Boat Lift Parts
Service Areas
Gallery
0
0
Contact Us
Tampa Bay Area Boat Lift Service And Repair Inc.
About us
About us
Contact Us
Maintenance Plans
Boat Lift Parts
Service Areas
Gallery
0
0
Contact Us
Folder: About us
Back
About us
Contact Us
Maintenance Plans
Boat Lift Parts
Service Areas
Gallery
Contact Us
Boat Lift Parts Elite 56 Frame Painted Motor
Boat Lift Motor Image 1 of 7
Boat Lift Motor
Painted motor Image 2 of 7
Painted motor
Boat Lift Motor Image 3 of 7
Boat Lift Motor
Boat Lift Motor Image 4 of 7
Boat Lift Motor
Boat Lift Motor Image 5 of 7
Boat Lift Motor
Boat Lift Motor Image 6 of 7
Boat Lift Motor
Boat Lift Motor Image 7 of 7
Boat Lift Motor
Boat Lift Motor
Painted motor
Boat Lift Motor
Boat Lift Motor
Boat Lift Motor
Boat Lift Motor
Boat Lift Motor

Elite 56 Frame Painted Motor

from $285.06

Elite painted electric motors are single-phase motors with start capacitors. These motors are standard duty or heavy duty. This motor is factory-wired for 220 volts. A licensed electrician can rewire the motor to 110v. Fits all BH-USA flat-plate hoists and gear plates. Compatible with other brands that use the standard 4 ft x 2 ft flat-plate mounting holes.

The motor is a NEMA 56-frame motor. UL/CSA listed and approved. TENV (totally enclosed, non-ventilating) housing. The TENV housing serves as a barrier against dirt, insects, and water entering the motor.

This motor has a maximum runtime of 15 minutes. Finished in black. Includes colored T-wires. The electric motor comes with easy-to-follow instructions. Included are BH-USA’s equipment guide and wiring instructions.

Horsepower:
Quantity:
Add To Cart

Elite painted electric motors are single-phase motors with start capacitors. These motors are standard duty or heavy duty. This motor is factory-wired for 220 volts. A licensed electrician can rewire the motor to 110v. Fits all BH-USA flat-plate hoists and gear plates. Compatible with other brands that use the standard 4 ft x 2 ft flat-plate mounting holes.

The motor is a NEMA 56-frame motor. UL/CSA listed and approved. TENV (totally enclosed, non-ventilating) housing. The TENV housing serves as a barrier against dirt, insects, and water entering the motor.

This motor has a maximum runtime of 15 minutes. Finished in black. Includes colored T-wires. The electric motor comes with easy-to-follow instructions. Included are BH-USA’s equipment guide and wiring instructions.

Elite painted electric motors are single-phase motors with start capacitors. These motors are standard duty or heavy duty. This motor is factory-wired for 220 volts. A licensed electrician can rewire the motor to 110v. Fits all BH-USA flat-plate hoists and gear plates. Compatible with other brands that use the standard 4 ft x 2 ft flat-plate mounting holes.

The motor is a NEMA 56-frame motor. UL/CSA listed and approved. TENV (totally enclosed, non-ventilating) housing. The TENV housing serves as a barrier against dirt, insects, and water entering the motor.

This motor has a maximum runtime of 15 minutes. Finished in black. Includes colored T-wires. The electric motor comes with easy-to-follow instructions. Included are BH-USA’s equipment guide and wiring instructions.

You Might Also Like

Elite 56 Frame Stainless Motor 2.png 3.png 4.png 5.png 6.png 7.png
Elite 56 Frame Stainless Motor
from $434.56
Elite 1 HP Stainless C-Face Electric Motor Boat Lift Motor Boat Lift Motor
Elite 1 HP Stainless C-Face Electric Motor
$442.00
Elite 56 Frame Wired Motor with Maintained  Switch 11.png 12.png 14.png 9.png 10.png
Elite 56 Frame Wired Motor with Maintained Switch
from $392.45
Elite Stainless C-Face (Baseless) Motor 1.png 3.png 4.png 5.png 6.png
Elite Stainless C-Face (Baseless) Motor
from $388.38
2 in. Zinc Die-Cast Motor Pulley
2 in. Zinc Die-Cast Motor Pulley
$21.00

About Us Service Areas Gallery Contact Us Maintenance Plans